SPA PROTECT EMPIRE 800G

EASY BROME

SANITIZER

Is a practical easy to use sanitizer for spa and hot tub water.

It rapidly and completely dissolves to provide effective bromine disinfection without cloudy or insoluble residue in the water.

Is a super oxidation treatment to rid spa water of organic waste such as perspiration, body oil, cosmetics that tend to cloud water.

Can be used as a pre-treatment to create a bromine bank in bromine spas and hot tubs.

1. Maintain recommended daily levels as determined by testing kit.

Free available bromine: 3.0 – 5.0 ppm

pH: 7.2 – 7.8

Total alkalinity: 100 – 120 ppm

Calcium hardness: 150 – 200 ppm

2. The filtration system should be maintained in order to ensure proper disinfection.

3. Apply 6 g of EASY BROME per 1,000 L of spa water directly to bather-free spa water with circulation system operating. Test for available bromine and repeat above dosage at 15-20 minute intervals until a residual of 3.0 – 5.0 ppm is reached.

4. Periodic superchlorination of spa water is recommended after heavy use, or once a week, in moderately used spas to remove organic waste. Apply 35 g of EASY BROME per 1,000 L of spa water as often as required. Bathers should not use spa until reading drops to 5.0 ppm.

5. Persistent foam formation, turbid, or malodorous water, are indicators of inadequate sanitizer levels. To correct such conditions, superoxidize water by adding 25 g of EASY BROME per 1,000 L of spa water. Maintain circulation at least 30 minutes and wait 4 hours before using. EASY BROME contains stabilizer (cyanuric acid) which will accumulate in spa water. Keep stabilizer within 30-100 ppm range by dilution with fresh water.

6. For proper sanitation, spa must be completely drained periodically.

BROMINE SANITATION:

Test bromine levels daily.

Maintain a daily bromine sanitizer level of 3 – 5 ppm.

Use on initial fill of spa and weekly for maintenance.

Can be used to pre-treat bromine spas and hot tubs.