Davey D25A Pump

Portable electric submersible drainage pump used for transferring clean or slightly dirty water; dewatering of cellars, garages, ditches and ponds; or decorative water features. Provides up to 400W nominal output.

Features and benefits

• Equipped with preset length float switch for automatic operation.
• Open impeller, centrifugal design – able to pump small soft solids in suspension, and less susceptible to blockage
• Double mechanical shaft seal in oil bath with hard faced silicon carbide / ceramic seal on pump side
• Sand slinger lip seal
• Corrosive resistant 304 stainless steel motor shell and strainer
• High quality paint finish
• Automatic resetting thermal overload – protected against overloading
• HO7RNF oil resistant leads, 10 metres long with 3 pin power plug – easy to connect to power supply, and longer life in dirty water

Materials of construction

Motor top: Cast iron

Pump body: Cast iron

Motor shell: 304 stainless steel

Strainer: 304 stainless steel

Impeller: Cast iron 

Lip ring: Nitrile

Mechanical seal: Carbon/ceramic on motor side

Seal & bottom bearing housing: Cast iron

Handle: 304 stainless steel

Fasteners: 304 stainless steel

Float and power supply leads: H07RN-F oil resistant
 

Operating limits

Capacities: 200 lpm

Heads to: 9.5m

Maximum submergence: 10m

Maximum operating temperature: 50ºC